SME VoIP Handset guide
Proprietary and Confidential Page | 35
6.6.4 Confirmation Sound
This feature can either enable or disable confirmation sounds on the handset.
When the function “Confirmation sound” is enabled (On), an audible indication is given when an event succeeds
or fails.
For example, a positive confirmation sound is generated when a new setting is set or an entry is saved
successfully in the phonebook. A negative confirmation sound is generated if the action fails.
When the confirmation sound is set to “Off” no sounds is generated in either case.
6.6.5 Coverage Warning
A coverage warning can be set to occur when the handset is out of range of a base station in the system.
When the feature “Coverage warning” is enabled (On), an audible indication is given in the earpiece of the
handset when the user is close to the maximum range of the nearest base station in the system. This way the
user will know that the call is at the edge of the possible coverage of the call and that the user has to move back
in coverage to keep the call going.
NOTE: This feature is only working when the handset is in call, not when in idle.
6.6.6 Charger Warning
“Charger Warning” is a feature that enables the handset to make a sound when put in the charger to indicate
that the handset is charging.
When the feature “Charger warning” is enabled (On), an audible indication will be given when the handset is
correctly connected to the charger.
If the feature is set to “Off”, no audible indication will be given as the handset is put in the charger.
To Next Page
Loading...
