SME VoIP Handset guide
Proprietary and Confidential Page | 27
In the images above, it is illustrated how the power save can be set between 5 seconds and 60 seconds. An
interval is chosen by pressing the left softkey “Select” when the desired item is highlighted.
6.5.5 Security
In the “Security” menu it is possible to set an automatic keylock and change the PIN of the handset.
Automatic keylock
If the “Automatic keylock” feature is enabled, the keypad will lock automatically after a certain amount of time
that the handset has not been used. The currently applied setting is displayed when highlighting or selecting the
menu “Automatic keylock”.
A list of selectable timeouts is displayed when the user enters the “Automatic keylock” menu. Any one of these
can be selected by pressing the left softkey “Select” when the desired time interval is highlighted. Afterwards,
when the handset has been inactive in the selected time interval, the keypad will lock automatically.
NOTE: It is not possible to use the keys when these are locked. The user has to unlock the keys by long-pressing
. Only emergency numbers (e.g. 911) can be called without having to unlock the keypad.
Change PIN
In “Change PIN” the handset security PIN code can be changed – as an example the PIN code is used when
settings are reset.
The current PIN code must be entered first to change it to a new PIN code.
6.5.6 Handset Name
Handset name
By selecting “Handset name” the name of the handset can be changed.
An editor is displayed when entering the menu. The handset name is typed in using the numeric keys and
afterward pressing the selection key to save the name. The handset name is displayed in the third line of the idle
display.
To Next Page
Loading...
