EasyManuals Logo

RuggedCom RMC30 User Manual

Default Icon
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
1. Administration
ROS® v3.11User Guide 19 RMC30
Figure 1.7. IP Gateways Form
Destination
Synopsis: ###.###.###.### where ### ranges from 0 to 255
Default: 0.0.0.0
Specifies the IP address of the destination device. An IP address is a 32-bit number that
is notated by using four numbers from 0 through 255, separated by periods.
Subnet
Synopsis: ###.###.###.### where ### ranges from 0 to 255
Default: 0.0.0.0
Specifies the IP subnet mask of the destination. An IP subnet mask is a 32-bit number
that is notated by using four numbers from 0 through 255, separated by periods. Typically,
subnet mask numbers use either 0 or 255 as values (e.g. 255.255.255.0) but other
numbers can appear.
Gateway
Synopsis: ###.###.###.### where ### ranges from 0 to 255
Default: 0.0.0.0
Specifies the gateway IP address. The gateway address must be on the same IP subnet
as this device.
The default gateway configuration will not be changed when resetting all
configuration parameters to defaults.
1.8. IP Services
These parameters provide the ability to configure properties for IP services provided by the
device.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the RuggedCom RMC30 and is the answer not in the manual?

RuggedCom RMC30 Specifications

General IconGeneral
BrandRuggedCom
ModelRMC30
CategoryMedia Converter
LanguageEnglish