RuggedCom RMC30 - 6. Firmware Upgrade and Configuration Management; Files, Transfer Methods, and Console Sessions

2. Serial Protocols
ROS® v3.11User Guide 77 RMC30
UDP, the remote port is configured using the "Remote Hosts" table. For more information,
see the Remote Hosts section.
Link Stats
Synopsis: { Disabled, Enabled }
Default: Enabled
Enables links statistics collection for this protocol.
2.3.13. Device Addresses
Up to 1024 entries can be created in this table.
Figure 2.29. Device Address Table
Figure 2.30. Device Address Form