2. Serial Protocols
ROS® v3.11User Guide 75 RMC30
When both outgoing and incoming connections are enabled (client or server), this is the
remote IP address to which to place an outgoing TCP connection request or from which
to accept an incoming request.
Link Stats
Synopsis: { Disabled, Enabled }
Default: Enabled
Enables link statistics collection for this protocol.
2.3.12. TelnetComPort
Figure 2.28. TelnetComPort Form
Port
Synopsis: 1 to maximum port number
Default: 1
The serial port number as seen on the front plate silkscreen of the RuggedServer.
Pack Char
Synopsis: 0 to 255 or { Off }
Default: Off
To Next Page
Loading...
Need help?
General