2. Serial Protocols
ROS® v3.11User Guide 62 RMC30
2.3.3. Remote Hosts
Figure 2.14. Remote Hosts Table
Figure 2.15. Remote Hosts Form
IP Address
Synopsis: ###.###.###.### where ### ranges from 0 to 255
Default:
The IP address of the remote host.
IP Port
Synopsis: 1 to 65535 or { Unknown }
Default: 50000
The IP port that remote host listens to. If this is zero (Unknown), the unit only receives from
the remote host but does not transmit to it.
Port(s)
Synopsis: Any combination of numbers valid for this parameter
Default: All
The local serial ports that the remote host is allowed to communicate with.
To Next Page
Loading...
Need help?
General