RuggedCom RuggedRouter RX1000 - Configuring IP Address Information; Configuring Passwords; Figure 2: Ruggedrouter Setup Password Change Menu; Figure 3: Ruggedrouter Interfaces Setup Menu

Chapter 1 - Setting Up And Administering The Router
Configuring Passwords
The Change Passwords command changes the rrsetup and root account passwords.
These passwords should be changed before installing the router on the network.
Configuring IP Address Information
The Change Port IP Address command configures port IP addresses and gateways.
Each port number X has a default address of 192.168.X.1 and a mask of
255.255.255.0.
The Configure Default Gateway Settings command configures the default gateway.
The Configure DNS Client Settings command configures the DNS server address. If
the router is part of a domain, enter the domain name in the “Search Domain” field.
RuggedCom 27
Figure 2: RuggedRouter Setup Password Change Menu
Figure 3: RuggedRouter Interfaces Setup Menu
Figure 4: RuggedRouter DNS Client Menu