RuggedRouter
®
User Guide
The Log changes made to files by each action field causes verbose logging and
should be left enabled.
Authentication
Figure 20: Webmin Configuration Menu, Authentication
This menu allows you to configure what Webmin will do when a number of failed
logins from the same IP address occur.
If the Enable password timeouts field is selected, the host will be blocked for the
specified period of time. If the Log blocked hosts, logins and authentication
failures to syslog field is selected, warning messages will be added to the syslog.
Enabling the Enable session authentication field, activating “Auto-logout after..”
will cause an individual administrators session to be logged out after the specified
period.
Webmin Events Log
Figure 21: Webmin Events Log
This menu allows you to search the Webmin log for changes made by yourself or
other administrators.
38 RuggedCom
To Next Page
Loading...
