Web-based Configuration Guide Network Settings
100
4 Network Settings
Note
This chapter takes the currently logged in device as an example to describe the entry of each function setting
page. If you need to configure other devices in the network, please refer to the following path to enter the
configuration page of the corresponding device, and then configure the function:
For RG-RAP2266: Click Manage Network Device.
For the other RAP models: Choose WLAN > APs > Select the target device in the device list and
click Manage.
4.1 Switching Work Mode
4.1.1 Work Mode
See Work Mode for details.
4.1.2 Self-Organizing Network Discovery
When setting the work mode, you can set whether to enable the self-organizing network discovery function. This
function is enabled by default.
After the self-organizing network discovery function is enabled, the device can be discovered in the network and
discover other devices in the network. Devices network with each other based on the device status and
synchronize global configuration. You can log in to the Web management page of any device in the network to
check information about all devices in the network. After this function is enabled, clients can maintain and
manage the current network more efficiently. You are advised to keep this function enabled.
If the self-organizing network discovery function is disabled, the device will not be discovered in the network and
it runs in standalone mode. After logging in to the Web page, you can configure and manage only the currently
logged in device. If only one device is configured or global configuration does not need to be synchronized to
the device, you can disable the self-organizing network discovery function.
4.1.3 Configuration Steps
Note
If you need to switch the work mode to wireless bridging mode, please see Wireless Repeater Mode for
details.
For RG-RAP2266 model: In Local Device mode, choose Overview > Device Details
For other RAP models: Choose ( WLAN > APs > Manage) Overview > Device Details
Click the current work mode to change the work mode.
To Next Page
Loading...
