Web-based Configuration Guide Wi-Fi Network Settings
43
but is inferior in signal coverage and through-wall penetration. You can select an appropriate signal band
based on actual requirements. The default Wi-Fi band is 2.4G+5G, indicating that Wi-Fi signals are emitted
in both 2.4 GHz and 5 GHz bands.
3.6 Configuring Band Steering
Caution
This function can be enabled only after the dual-band integration (Band is set to 2.4G+5G) is enabled on the
Wi-Fi network. A client automatically selects a band only when the SSIDs of the 2.4 GHz and 5 GHz bands are
the same.
(1) Go to the page for configuration.
Method 1: Choose Network ( WLAN) > Wi-Fi > Wi-Fi Settings. Select the target Wi-Fi.
Method 2: Choose Network ( WLAN) > Wi-Fi > Wi-Fi List. Select the target Wi-Fi in the list and
click Edit in the action column.
(2) Click Expand, turn on Band Steering in the expanded settings, and click Save. After the function is enabled,
the client supporting 5 GHz selects the 5G Wi-Fi network preferentially.
To Next Page
Loading...
