Web-based Configuration Guide Network Settings
116
(1) Select a dynamic ARP entry in the ARP list and click Bind. You can select multiple entries to be bound at
one time and click Bind Selected to bind them. To remove the binding between a static IP address and a
MAC address, click Delete in the Action column.
(2) Click Add, enter the IP address and MAC address to be bound, and click OK. The input box can display
existing address mappings in the ARP list. You can click a mapping to automatically enter the address
mapping.
4.15 Configuring LAN Ports
Caution
The configuration takes effect only on APs having wired LAN ports.
Choose Network ( WLAN) > LAN Ports.
Enter the VLAN ID and click Save to configure the VLAN, to which the AP wired ports belong. If the VLAN ID is
null, the wired ports and WAN port belong to the same VLAN.
In self-organizing network mode, the AP wired port configuration applies to all APs having wired LAN ports on
the current network. The configuration applied to APs in LAN Port Settings takes effect preferentially. Click Add
To Next Page
Loading...
