Web-based Configuration Guide Wi-Fi Network Settings
72
3.20 Wireless Authentication
Caution
This function is supported by RG-RAP2266 and RG-RAP52-OD.
3.20.1 Overview
Wireless authentication verifies the identity of users on a wireless network. Only authenticated users can access
the network, ensuring wireless network security. You can configure authentication-free for wireless STAs (IP
address/MAC address), public IP addresses, and domain names. Users can directly use network services or
access specific websites without entering the username, password, or other information.
To use the wireless authentication function, ensure that the AP is added to Ruijie Cloud and is online. Then,
configure a portal template on Ruijie Cloud and apply it to a specific SSID. When STAs connect to this SSID and
access the network, the AP allows STAs added to the authentication-free lists configured on the Eweb
management system (excluding those added to the MAC address blocklist) to access the network without
authentication. The AP forbids STAs whose MAC addresses are added to the MAC address blocklist configured
on the Eweb management system from accessing the network. For other users or domain names, the AP
redirects them to the portal authentication page. Users need to complete identity verification on the portal page.
The following four authentication modes are supported:
One-click Login: indicates login without the username and password.
Voucher: indicates login with a random eight-digit password.
Account: indicates login with the account and password.
SMS: indicates login with the phone number and code.
Two or more authentication modes can be configured in a portal template. When multiple authentication modes
are configured, users can select an authentication mode on the portal page.
3.20.2 Configuring One-click Login on Ruijie Cloud
1. Configuring a Portal Template with the Authentication Mode Set to One-click Login
(1) Log in to Ruijie Cloud, choose Project > Configuration > Authentication > Captive Portal, and select a
network that needs to configure wireless authentication.
(2) Click Add to open the portal template configuration page.
(3) Configure basic information of the portal template.
To Next Page
Loading...
