Ruijie Reyee RG-RAP52-OD - Configuring Wi-Fi Blocklist or Allowlist

Web-based Configuration Guide Wi-Fi Network Settings
52
4. Configuring Packet-based Rate Limiting
Choose Network ( WLAN) > LimitSpeed > Packet-based Rate Limiting.
(1) Enable Wireless Rate Limiting.
(2) Select the specific type of packets for rate limiting, configure the rate limit value, and click Save.
3.13 Configuring Wi-Fi Blocklist or Allowlist
3.13.1 Overview
You can configure the global or SSID-based blocklist and allowlist . The MAC address supports full match and
OUI match.