Web-based Configuration Guide Wi-Fi Network Settings
60
Note
The Client Count Limit refers to the maximum number of clients that can be connected to a single access
point.
3.14.8 Configuring the Kick-off Threshold
Choose Network ( WLAN) > Radio Frequency.
In the case of multiple Wi-Fi signals, setting the kick-off threshold can improve the wireless signal quality to a
certain extent. The farther the client is away from the access point, the lower the signal strength is. If the signal
is lower than the kick-off threshold, the Wi-Fi will be disconnected, and the client will be forced offline and select
a nearer Wi-Fi signal.
However, the higher the kick-off threshold is, the easier it is for the client to be kicked offline. To ensure normal
Internet access, you are advised to disable the kick-off threshold or set the value to less than -75dBm. After
adjusting the configuration, click Save.
Caution
In the self-organizing network mode, the kick-off threshold settings will be synchronized to all devices in the
network.
3.14.9 Configuring the Roaming Sensitivity
For RG-RAP2266 model:
Configure the master device. Choose Network ( WLAN) > Radio Frequency
To Next Page
Loading...
