Web-based Configuration Guide System Settings
126
5 System Settings
5.1 PoE Settings
Caution
This function is supported by only RG-RAP2266.
In Local Device mode, choose Advanced > PoE Settings.
Set the power mode for the AP to accept power over PoE. In AF mode, the maximum power supported by the
device is 15.4 W. In AT mode, the maximum power is 30 W according to the IEEE 802.3at standard. In BT mode,
the maximum power is 51 W according to the IEEE 802.3bt standard. By default, the device automatically
negotiates with the power sourcing equipment (PSE) about the power mode. The default configuration is
recommended.
5.2 Setting the Login Password
For RG-RAP2266 model:
If the device works in self-organizing network mode, and Network mode webpage is displayed, choose
System > Login Password
In standalone mode: Choose System > Login > Login Password
To Next Page
Loading...
