Ruijie Reyee RG-RAP52-OD - Configuring Wi-Fi Band

Web-based Configuration Guide Wi-Fi Network Settings
42
Table 3-2 Description of Wireless Client Information
Item
Description
Username
Name of a client
MAC
MAC address of the client
IP
IPv4 address of the client
SN
SN of the device associated with the client
Duration
Time when the client connects to the Wi-Fi network
RSSI
RSSI of the Wi-Fi network associated with the client
Rate/Negotiation Rate
Association rate of the client and AP
Band
Band type of the Wi-Fi network, to which the client connects
SSID
Name of the Wi-Fi network associated with the client
Channel
Channel of the Wi-Fi network associated with the client
Current Rate
Uplink and downlink data rate.
3.5 Configuring Wi-Fi Band
(1) Go to the page for configuration.
 Method 1: Choose Network ( WLAN) > Wi-Fi > Wi-Fi Settings. Select the target Wi-Fi.
 Method 2: Choose Network ( WLAN) > Wi-Fi > Wi-Fi List. Select the target Wi-Fi in the list and
click Edit in the action column.
(2) Set the band of Wi-Fi signals. The device supports the 2.4 GHz and 5 GHz bands. Compared with the 2.4
GHz band, the 5 GHz band supports a higher network transmission rate and is less susceptible to interference,