Ruijie Reyee RG-RAP52-OD - Configuring AP Isolation

Web-based Configuration Guide Wi-Fi Network Settings
46
3.9 Configuring AP Isolation
(1) Go to the page for configuration.
 Method 1: Choose Network ( WLAN) > Wi-Fi > Wi-Fi Settings. Select the target Wi-Fi.
 Method 2: Choose Network ( WLAN) > Wi-Fi > Wi-Fi List. Select the target Wi-Fi in the list and
click Edit in the action column.
(2) Click Expand, turn on AP Isolation in the expanded settings and click Save. The clients joining in this Wi-Fi
network will be isolated. The clients associated with the same access point cannot access each other.