Ruijie Reyee RG-RAP52-OD - Configuring Access Threshold

Web-based Configuration Guide Wi-Fi Network Settings
61
 Configure the slave device. Choose Devices > Select the target device in the device list and click SN >
Radio Frequency
For other RAP models:
 Configure the master device. Choose WLAN > Radio Frequency
 Configure the slave device. Choose WLAN > APs > Select the target device in the device list and click
Manage > WLAN > Radio Frequency
The roaming sensitivity enables the device to actively disconnect a client from the Wi-Fi network when the client
is far away, forcing the client to re-select the nearest signal and thus improving the sensitivity of wireless roaming.
Higher the roaming sensitivity level, smaller the wireless signal coverage. To improve the signal quality for a
client moving within more than one Wi-Fi coverage, improve the roaming sensitivity level. You are advised to
keep the default settings. After adjusting the configuration, click Save.
3.14.10 Configuring Access Threshold
For RG-RAP2266 model:
 Configure the master device. Choose Network ( WLAN) > Radio Frequency
 Configure the slave device. Choose Devices > Select the target device in the device list and click SN >
Radio Frequency
For other RAP models:
 Configure the master device. Choose WLAN > Radio Frequency