Web-based Configuration Guide Network Settings
107
Wi-Fi signals.
Caution
After the configuration is saved, the AP will be disconnected from the Wi-Fi network and needs to
connect to the new Wi-Fi network. Exercise caution when performing this operation. Record the new Wi-
Fi name and password.
You are advised to install the AP in a position where the RSSI is greater than two bars of signal to
prevent signal loss. If the signal at the installation position is too weak, the Wi-Fi extension may fail or the
quality of extended signal may be poor.
4.6 Creating a VLAN
Caution
This function is not supported when the device works in AP mode.
For RG-RAP2266 model: In Local Device mode, choose Network > LAN > LAN Settings
For other RAP models: Choose ( WLAN > APs > Manage >) Network > LAN > LAN Settings
A LAN can be classified into multiple VLANs. Click Add to create a VLAN.
To Next Page
Loading...
