Web-based Configuration Guide Network Settings
106
(1) Select the Wi-Fi signal of the upper-layer device that you want to extend. The configuration items of the local
device are displayed. If the signal of the upper-layer device is encrypted, enter the Wi-Fi password of the
upper-layer device.
(2) Configure Local Router Wi-Fi. You can select New Wi-Fi or Same as Primary Router Wi-Fi.
○ If you select Same as Primary Router Wi-Fi, the Wi-Fi settings of the router are automatically
synchronized with those on the primary router. Generally, clients merge Wi-Fi signals with the same
name into one Wi-Fi signal, and they can search out only the Wi-Fi signal of the primary router.
○ If New Wi-Fi is selected, you can set a local Wi-Fi name and password. Clients will search out different
To Next Page
Loading...
