Ruijie Reyee RG-RAP52-OD - Configuring the IPv6 Neighbor List

Web-based Configuration Guide Network Settings
124
(1) Click Add.
(2) Enter the IPv6 address and DUID of the client.
(3) Click OK.
4.16.9 Configuring the IPv6 Neighbor List
In IPv6, Neighbor Discovery Protocol (NDP) is an important basic protocol. NDP replaces the ARP and ICMP
route discovery protocols of IPv4, and supports the following functions: address resolution, neighbor status
tracking, duplicate address detection, router discovery, and redirection.
In Local Device mode, choose Security > IPv6 Neighbor List.