Ruijie Reyee RG-RAP52-OD - Viewing DHCPv6 Clients; Configuring the Static DHCPv6 Address

Web-based Configuration Guide Network Settings
123
Parameter
Description
WAN_V6. The default value is all interfaces.
Subnet Prefix Length
Configure the length of the subnet prefix. The value ranges from 48 to
64.
Subnet ID
Configure the subnet ID in hexadecimal notation. 0 indicates that the
subnet ID automatically increments.
Lease Time (Min)
Configure the lease term of the IPv6 address. The unit is minutes.
DNS Server
Configure the address of the IPv6 DNS server.
4.16.7 Viewing DHCPv6 Clients
In Local Device mode, choose Network > IPv6 Address > DHCPv6 Clients.
When the device acts as a DHCPv6 server to assign IPv6 addresses to clients, you can view information about
the clients that obtain IPv6 addresses from the device on the current page. The information includes the host
name, IPv6 address, remaining lease term, and DHCPv6 Unique Identifier (DUID) of each client.
Enter an IPv6 address or DUID in the search bar, and click to quickly find the information of the specified
DHCPv6 client.
4.16.8 Configuring the Static DHCPv6 Address
Configure the IPv6 address statically bound to the DUID of a client so that the client can obtain the specified
address each time.
In Local Device mode, choose Network > IPv6 Address > Static DHCPv6.