Ruijie Reyee RG-RAP52-OD - Configuring Repeater Mode

Web-based Configuration Guide Network Settings
104
For RG-RAP2266 model: In Local Device mode, choose Network > LAN > LAN Settings
For other RAP models: Choose ( WLAN > APs > Manage >) Network > LAN > LAN Settings
Click Edit. In the displayed dialog box, enter the IP address and subnet mask, and click OK. Change the IP
address of the LAN port. Enter the new IP address in the browser and log in to the device again to configure
and manage the device.
4.5 Configuring Repeater Mode
4.5.1 Wired Repeater
For RG-RAP2266 model: In Local Device mode, choose Network > Repeater Mode
For other RAP models: Choose ( WLAN > APs > Manage >) Network > Repeater Mode
Connect a network cable from the WAN port (uplink LAN port) of the device to the upper-layer device.