Ruijie Reyee RG-RAP52-OD - Fast Internet Access; Configuration Environment Requirements; Default Configuration; Login to eWeb

Web-based Configuration Guide Fast Internet Access
1
1 Fast Internet Access
1.1 Configuration Environment Requirements
1.1.1 PC
 Browser: Google Chrome, Internet Explorer 9.0, 10.0, and 11.0, and some Chromium/Internet Explorer
kernel-based browsers (such as 360 Extreme Explorer) are supported. Exceptions such as garble or format
error may occur if an unsupported browser is used.
 Resolution: 1024 x 768 or a higher resolution is recommended. If other resolutions are used, the page fonts
and formats may not be aligned, the GUI is less artistic, or other exceptions may occur.
1.2 Default Configuration
Table 1-1 Default Web Configuration
Item
Default
IP address
10.44.77.254
Username/Password
A username is not required when you log in for the
first time. The default password is admin.
1.3 Login to eWeb
1.3.1 Connecting to the Access Point
You can open the management page and complete Internet access configuration only after connecting a client
to the access point in either of the following ways:
 Wired Connection
Connect a local area network (LAN) port of the access point to the network port of the PC, and set the IP address
of the PC. See Configuring the IP Address of the Management Client.
 Wireless Connection
On a mobile phone or laptop, search for wireless network @Ruijie-SXXXX (XXXX is the last four digits of the
MAC address of each device). In this mode, you do not need to set the IP address of the management Client,
and you can skip the operation in Configuring the IP Address of the Management Client.