Web-based Configuration Guide Fast Internet Access
10
1.8 Introduction to the eWeb GUI
To facilitate flexible device management, the Web page displays different system configuration menus in different
work modes. For details about the work mode, see Switching Work Mode.
As to the RG-RAP2266 model, please refer to Dual Management Webpages.
As to other RAP models, please refer to Single Management Webpage.
Note
When the self-organizing network is enabled, the eWeb GUI is subject to the master device in the network. If
the master device supports the dual management webpages, the slave device also displays the dual
management webpages.
1.8.1 Single Management Webpage
1. Network-wide Management
The device works in self-organizing network mode by default. The Web page displays the network-wide
management menu on the left side, in which you can check the current status of all devices in the network, and
modify network-wide configuration, including global Wi-Fi network management configuration (APs and Wi-Fi),
routing management configuration (if routers exist in the network), switch management configuration, and
network-wide management configuration (time, password, network-wide reboot, and other system settings).
2. Standalone Management
If a device is in self-organizing network mode, click the name of the currently logged in device or click Manage
of a specified device in the device list to configure and manage the device.
To Next Page
Loading...
