Ruijie Reyee RG-RAP52-OD - Page 82

Web-based Configuration Guide Wi-Fi Network Settings
71
Table 3-4 Traffic load balancing configuration
Parameter
Description
Group Name
Enter the name of the AP load balancing group.
Type
Select Traffic Load Balancing.
Rule
Configure a detailed load balancing rule, including the maximum traffic allowed
on an AP, the difference between the current traffic and the traffic on the AP
with the lightest load, and the number of attempts to the AP with full load.
By default, when the traffic load on an AP reaches 500 Kbit/s and the difference
between the current traffic and the traffic on the AP with the lightest load
reaches 500 Kbit/s, clients can associate only to another AP in the group. After
a client association is denied by an AP for 10 times, the client will be allowed to
associate to the AP upon the next attempt.
Members
Specify the APs to be added to the AP load balancing group.