Web-based Configuration Guide Network Settings
120
Table 4-2 IPv6 Address Configuration Parameters of the WAN Port
Specify the method for obtaining an IPv6 address for the WAN port.
DHCP: The current device will act as a DHCPv6 client and apply
for the IPv6 address/prefix from the upstream network device.
Static IP: If this Internet connection type is selected, you need
to manually configure a static IPv6 address, gateway address,
and DNS server.
Null: The IPv6 function is disabled on the current WAN port.
If Internet is set to DHCP, the automatically obtained IPv6 address is
displayed.
If Internet is set to Static IP, you need to manually configure this
parameter.
If Internet is set to DHCP and the current device obtains the IPv6
address prefix from the upstream device. The obtained IPv6 address
prefix is displayed.
If Internet is set to DHCP, the automatically obtained gateway
address is displayed.
If Internet is set to Static IP, you need to manually configure this
parameter.
If Internet is set to DHCP, the automatically obtained DNS server
address is displayed.
To Next Page
Loading...
