Web-based Configuration Guide Wi-Fi Network Settings
50
(1) Enable Wireless Rate Limiting.
(2) Click Add. In the dialog box that appears, set the MAC address and uplink and downlink rate limit values of
the client, and click OK.
2. Configuring SSID-based Rate Limiting
Choose Network ( WLAN) > LimitSpeed > SSID-based Rate Limiting.
(1) Enable Wireless Rate Limiting.
(2) Click Edit in the Action column of the target SSID. In the dialog box that appears, set the uplink and downlink
rate limit modes and values, and click OK.
To Next Page
Loading...
