Web-based Configuration Guide Wi-Fi Network Settings
75
Table 3-7 Advanced Information of the Portal Page
Select the logo position (Upper, Middle, or Lower).
Select the background mask color. The default value is #a2a2a2.
Select the background mask opacity (0-100).
Welcome Message Text
Color
Select the welcome message text color. The default value is #ffffff.
Welcome Message Text
Size
Select the welcome message text size.
Select the button color. The default value is #0066ff.
Select the button text color. The default value is #ffffff.
Select the link color. The default value is #ffffff.
Select the text color in the box. The default value is #ffffff.
(6) After the configuration, click OK to save the portal template configurations.
2. Enabling One-click Login for an SSID
(1) Log in to Ruijie Cloud, choose Project > Configuration > Devices > Wireless > SSID, and select a network
that needs to configure wireless authentication.
(2) If the SSID that needs to enable wireless authentication is not created, click to open the SSID
configuration page. If the SSID that needs to enable wireless authentication is created, click in the
Action column. The following content only describes configurations related to wireless authentication. For
details about other SSID configuration parameters, see the Ruijie Cloud Cookbook.
(3) Enable Auth (disabled by default) and configure authentication-related parameters. After the configuration,
click OK to save the configurations.
Note
When Encryption Mode is set to a value other than WPA2-Enterprise(802.1x), Auth is available and you can
select whether to perform wireless authentication.
To Next Page
Loading...
