Need help?Do you have a question about the Saab TankRadar PRO and is the answer not in the manual?
General| Communication Protocol | HART, FOUNDATION Fieldbus |
|---|---|
| Process Connection | Flange, Thread |
| Housing Material | Stainless Steel, Aluminum |
| Antenna Type | Horn |
| Output | 4-20 mA, Digital |
| Protection Rating | IP66/IP67 |
| Material | Stainless Steel |
| Operating Temperature | -40 to +80 °C (-40 to +176 °F) |
Provides an overview of the manual's content and purpose, outlining its scope and key topics covered.
Explains the capabilities, flexibility, and connectivity options of the TankRadar Pro system.
Details how the radar level gauge operates using microwave signals and signal processing techniques.
Specifies dimensions for tank nozzle sockets to ensure optimal microwave propagation and performance.
Outlines spatial requirements for gauge positioning to avoid interference from tank walls.
Provides the physical measurements of the TankRadar Pro gauge.
Lists the necessary tools required for the installation of the TankRadar Pro gauge.
Step-by-step instructions for properly mounting the rod antenna.
Guides the installation of the cone antenna using PTFE sealing.
Guides the installation of the cone antenna using quartz sealing.
Details the installation procedure for the cone antenna with a process seal.
Lists recommended torque values for flange screws during installation.
Provides instructions for mounting the parabolic antenna.
Explains how to identify the installed options of the transmitter based on its model number.
Describes the standard and optional junction boxes and their components.
Details how to make external electrical connections to the device.
Provides instructions for connecting the transmitter to a TRL2 Bus interface.
Guides the connection of HART devices for configuration and monitoring.
Explains how to connect the optional Pro Display Panel to the transmitter.
Specifies cable types and requirements for safe and proper connections.
Highlights safety precautions related to the transmitter enclosure and energized operation.
Details power supply requirements and voltage compatibility for the transmitter.
Explains grounding procedures for the transmitter enclosure and electrical safety.
Provides a schematic illustration of transmitter connections and system integration.
Illustrates internal connections for power supply and display panel options.
Describes configuration options for the primary output (HART, TRL2 Bus).
Details configuration options for the secondary analog output (4-20mA).
Lists the hardware and software prerequisites for installing the Pro Setup software.
Step-by-step guide for installing the Pro Setup configuration software on a computer.
Instructions on how to launch the Pro Setup program from the Windows taskbar.
Explains how to set a password to protect transmitter configuration settings.
Details the procedure for logging into a password-protected system.
Guides on how to configure measurement units for level, rate, and volume.
Covers the process of connecting and configuring a new Pro transmitter.
Explains how to specify communication protocol and address for transmitter connection.
Guides on selecting software options, antenna type, and tank environment parameters.
Details how to configure tank geometry parameters like distance offsets and tank height.
Covers configuration of analog output settings, including ranges, alarms, and calibration.
Provides step-by-step instructions to calibrate the analog output signal.
Explains how to set up volume calculations using predefined tank shapes or strapping tables.
Describes tools for managing unwanted echoes from tank objects to improve measurement accuracy.
Details how to register specific echoes as false to improve measurement performance.
Instructions on how to view real-time level data from the transmitter using the software.
Outlines available service functions like diagnostics, register editing, and software resets.
General overview of operating the Pro Display Panel, its menus, and softkey functions.
Instructions on how to adjust the contrast of the display panel's LCD screen.
Explains how to enter and manage passwords for protected windows on the display panel.
Describes the functionality of the softkeys used for navigation and data input.
Details how measured data is displayed, including status indicators and measurement units.
Guides on using softkeys to select options and save configuration choices.
Explains how to input numerical values using the panel's interface.
Instructions for accessing and viewing tank and gauge related data via the View Menu.
Step-by-step guide for configuring a new radar gauge using the display panel.
Covers setting presentation units, language, and password for the display panel.
Procedure for changing the display language of the Pro Display Panel.
Provides a step-by-step guided configuration process for the transmitter.
Allows for comprehensive configuration of transmitter parameters.
Details how to set tank calibration parameters like distance offsets and tank height.
Covers configuration and calibration of the primary analog output.
Explains how to register and manage false echoes using the display panel interface.
Guides on setting up volume calculations via the display panel.
Lists various service functions available through the display panel, such as diagnostics.
Defines key distance parameters like Distance Offset (G), Tank Height (R), and Minimum Level Offset (C).
Illustrates how to set various tank distance parameters with practical examples.
Lists the technical specifications of the Saab TankRadar Pro, including power, temperature, and accuracy.
Provides specifications for the Pro Display Panel, including display type and softkey functions.
Details the specifications for the analog output signals, including range and resolution.
Explains error messages displayed on the Pro Display Panel and their meanings.
To Next Page
