Safe Fleet DH4 - Hardware Installation Checklist

© Safe Fleet | 2020 | All rights reserved | Part #: 700-1234 R1
DH4 Installation Guide
p. 10
DH4 Installation

HARNESSES (CAMERA, RECORDER, AND ACCESSORIES)
Ensure cables and harnesses are properly secured.
Check that sharp metal edges are not touching cables or harnesses.
Ensure connections are solid (no shorts).

CAMERAS
Ensure tight mounting.
Examine the internal harness connections and ensure they are solid.
Ensure the lid is properly seated on the gasket and secured tightly.


DVR
Ensure tight mounting.
Check that all connections are tight.

SYSTEM
Install fuses.
Plug portable video monitor into DVR, and power up the DVR from the vehicle ignition.




Test audio/video record and playback.
Reformat the hard drives by navigating to Main Menu System Program Update Format.
A warning message tells you all data will be erased. Click Yes. When the process completes and a message appears,
click OK
Fasten and lock the front cover. Secure the cable cover on the DVR using the screws provided.
Hardware Installation Checklist