Safe Fleet DH4 - Page 43

© Safe Fleet | 2020 | All rights reserved | Part #: 700-1234 R1
DH4 Installation Guide
p. 43
DH4 Advanced Conguration
 G Sensor settings recommendation
We recommend the default G-Sensor settings for large bus movement detection.
-
ration for each vehicle type. If thresholds are set too low, they may generate many alarms.
ITEM DESCRIPTION VALUE [DEFAULT]
Axis X - forward/back axis
Y - left/Right axis
Z - vertical axis
Vector - combination of X and Y axes (to capture driver behavior incidents)
Accident - combination of X and Y axes (higher threshold settings, to
capture vehicle accidents)
n/a
Current The current (live) values measured by the G Sensor (display only) n/a
Threshold 

X = [+/- 2.00]
Y = [+/- 2.00]
Z = [+/- 3.00]
V = [+ 3.00]
A = [+ 5.00]
Output 
selected output (DVR log entry, Signal, or Alarm).
[OFF], Log, S01-S10,
ALM1-ALM4
Peak 

activity.
n/a
Menu Options