Adding Row Prompts
Row prompts can be of benefit for device users, especially if
they have visual issues. Otherwise, the prompt will be spoken as
“Row 1”, “Row 2”, etc. To give a row a specific prompt:
1. Choose Menu
or > Edit Mode.
2. Press and hold on the row to which you want to add a
prompt.
3. Choose Edit Row Prompt from the menu.
4. Enter the appropriate prompt for that row.
5. Choose Done, and then Save.
Using Touchscreen Scanning
There are times when a device user isn’t capable of activating
specific areas on the screen. For example, maybe the user
doesn’t have the pointing skills to hit one button. Using the
touchscreen to scan allows the device user to tap anywhere on
the screen to initiate a scan of the buttons. In this scenario the
device screen acts as a single switch.
To set up touchscreen scanning:
1. Choose Menu
or > Settings > Input > Scanning >
Enable Scanning.
2. Choose Switch Access > Switch Configuration.
3. Choose Touchscreen Only.
4. Configure other settings as appropriate.
Note: The keyboard can be selected directly whether scanning is
turned on or off as long as Touchscreen Only isn’t checked in
the Switch Configuration menu.
NOVA chat User’s Guide 10022 Dedicated Version 1.4 Page 81
To Next Page
Loading...
