No Speech and the message is not going to the Speech Display
Bar when pressing buttons
This can be caused if a dwell time has been added. To check the
timing, choose Menu
or > Settings > Input > Timing
and check to see if an Acceptance or Release time has been set.
Clearing and Restoring Customizations
Although most systems are purchased with one end user, there
are times that devices are shared among more than one person.
This can occur when systems are used in schools or libraries. In
these cases, the vocabulary and settings will need to be cleared
between device users.
Clearing Custom Vocabulary
1. Choose Menu
or > Library > Menu or >
Delete.
2. Check each file in the list (the list contains only custom
files).
3. Choose Delete.
4. Choose Yes to confirm.
5. NOVA chat should now contain only the Saltillo-provided
default vocabulary files.
Restoring Default NOVA chat Settings
1. Choose Menu
or > Settings > Profiles > Load.
2. Choose Load Default Settings.
3. Manually set up the appropriate synthesizer and voice by
choosing Menu
or > Settings > Speech Output >
Voice.
NOVA chat User’s Guide 10022 Dedicated Version 1.4 Page 97
To Next Page
Loading...
