Sam4s ER-230 - Cash Declaration; Program 90 - Cash Declaration Programming

110 • X/Z Mode Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU
Cash Declaration
If compulsory cash declaration is required, you must declare the count of the cash drawer prior to
taking X or Z financial and clerk reports.
You can enter the cash drawer total in one step, or to facilitate the counting of the cash drawer, you
can enter each type of bill/coin and checks separately and let the register act as an adding machine.
You can also use the X/TIME key to multiply the denomination of currency times your count.
Either way you choose to enter cash, the register will compare your declaration with the expected
cash and check in drawer totals and print the over or short amounts on the report.
Program 90 - Cash Declaration Programming
For example:
1. Turn the control lock to the X-Mode or
Z-Mode
Switch to X-Mode or Z-Mode by press
MODE function key. (For ER-230)
(depending upon the type of report you
are taking.)
2. Press the SUBTL key.
3. Enter the total of cash.
4. Enter the total of checks.
5. Press the CASH key to total the
declaration.
DATE 15/01/2003 WED TIME 08:33
***_____CASH_DECLARATION_____***
CASH $98.76
CHECK $20.00
INPUT AMT $118.76
DRAWER TTL $118.76
DIFFERENCE $0.00
CLERK 1 No.000001 00000
CASH
0 SUBTL 9
8 7 6 CASH 9
0 0 0 CHECK2