Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU Program Mode Programming • 149
Program 200 - PLU Price/HALO Programming
NOTE: If Price Level in S-Mode, Memory Allocation is set to 2, the 2
nd
price level will allocated for
ALL PLUs and therefore must be programmed as well. Price of level 2 may be $0.00.
Before changing price, please find out what’s the setting for Price Level in S-Mode, Memory
Allocation.
When Price Level is set to 2, and only one of the levels price is changing, the unchanged
price of another level must be entered as well, even the original price of another level is
$0.00.
If a PLU is set open, the number entered will be a HALO (high amount lock out). If a PLU is set
preset, the amount entered will be a preset price. If a PLU is set with gallonage status, enter the price
per liter here. (Enter price per liter in tenths of a cent, i.e. 1299 for $1.29 9/10 per liter.)
Programming PLU/PLUs Price/HALO
1. Turn the control lock to the PGM-Mode.
Switch to P Mode by press MODE function key. (For ER-230)
2. To begin the program, enter 2 0 0, press the SUBTL key.
3. Select the PLU or PLUs you wish to program in one of the following ways:
• Press a PLU on the keyboard, or
• Press the first PLU in a range of PLUs that are to receive the same setting then press
the last PLU, or
• Enter up to 15 digit number of the PLU and press the PLU key, or
• Enter the number of the first PLU in a range of PLUs that are to receive the same
setting; press the PLU key. Enter the last PLU number in the range; press the PLU
key, or
• For a barcode item, scan the barcode. (Only for single item.)
0 SUBTL0 2
PLU
PLU
PLU
PLU
Enter the PLU#,
up to 15 digits
PLU
Enter the first PLU#,
up to 15 digits
Enter the last PLU#,
up to 15 digits
PLU
To Next Page
Loading...
