Sam4s ER-230 - CHECK # (for Soft;Hard Check - Bill or Account) (Exclude ER-230)

190 • Program Mode Programming Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU
CHECK # (for Soft/Hard Check - Bill or Account) (Exclude ER-230)
Options - Program 70 (PGM-Mode)
Address OPTION VALUE = SUM
N1
Key is inactive?
Yes = 1
No = 0
Required at Start of Sale?
Yes = 2
No = 0
Opening clerk has exclusive access?
Yes = 4
No = 0
N2
Check track # and balance will print on receipt?
Yes = 0
No = 1
Check track # and balance will print on remote?
Yes = 0
No = 2
Allow only one check per table?
Yes = 4
No = 0
N3
Check# is automatically assigned by register?
Yes = 1
No = 0
PBAL Key is used as Drive thru recall key?
Yes = 2
No = 0
N4
Length of Check
(0-9; 0 is no limit for maximum - 10 digits)
0
ÚDefault values have been highlighted in bold print
Descriptor - Program 80 (PGM-Mode)
- Refer to “Program 80 - Function Key Descriptor”
CHECK#
CASH
Repeat for another function key
N1 SUBTL 0 7 N2 N3 N4