Sam4s ER-230 User Manual

Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU Program Mode Programming • 177
Program 70 - Function Key Options Programming
Use Program 70 to set options for function keys. Because of the differences inherent in function keys,
individual options will be different. See the specific instructions for each key in this chapter to find
the options for each key.
Programming the Function Key Options/Status
1. Turn the control lock to the PGM-Mode.
Switch to P Mode by press MODE function key. (For ER-230)
2. To begin the program, enter 7 0, press the SUBTL key.
3. Enter the values for the option digit or digits. Depending on the function key you are
programming, you may enter up to six digits - N1 through N6. Determine the values for
N1 through N6 by referring to the specific function key information that follows. (You
do not need to enter preceding zeros. For example, if the function key offers six digits,
N1 through N6 and you are only selecting a value for N6, just enter the value for N6.)
Press the function key you wish to program.
4. To program additional function keys, repeat from step 3, or press the CASH key to
finalise the program.
CASH
0 SUBTL7
N3 N2 N1 N4 N5
FUNCTION
KEY
N6

Sam4s ER-230 Specifications

General

Brand	Sam4s
Model	ER-230
Category	Cash Register
Language	English