Samsung SCX-8030ND Series - Page 317

7.Trouble
s
● Code :
A4-1111
● Error message :
A
ctuator Sensor Fai
● Symptom / Cause :
The eraser circuit is short or open.
● Troubleshooting method :
1. Turn the machine off and on.
2. Check if the eraser lamp connector is connected pr
o
3. If the problem persists, replace the eraser lamp. (R
e
Eraser Lamp
● Replacement part
- JC92-02244A : PBA-ERASER
Service Manual
SCX-8030/8040 series
7-
2
s
hooting
lure : #A4-1111. Please turn off then on
o
perly. Reconnect it.
e
fer to 3.7.14 in the chapter 3.)
SAMSUNG ELECTRONICS
Version 0.05
2
4