Samsung SCX-8030ND Series - Page 327

7.Trouble
s
● Code :
C6-1110
C6-1120
● Error message
:
Prepare new fuser
u
Replace with new f
u
● Symptom / Cause :
The fuser unit is at the end of its life (150K).
● Troubleshooting method :
1. Turn the machine off and turn it on again.
2. Print the supply information report and check the fu
3. Replace the fuser unit.
CAUTION
The temperature gets high in the vicinity of the fuser
Before replacing it make sure that fuser unit has coo
Before
replacing
it
,
make
sure
that
fuser
unit
has
coo
[A]
● Replacement part
- JC91-00952A : FUSER (220V)
- JC91-00951A : FUSER (110V)
Service Manual
SCX-8030/8040 series
7-
3
s
hooting
:
u
nit.
u
ser unit.
ser unit life.
unit. When replacing it, you may get burned.
oled
oled
.
1. Open the Cover-Side.
2. Remove 4 screws from the left/right.
3. Remove the fuser unit by holding the
handles [A].
SAMSUNG ELECTRONICS
Version 0.05
3
4