Chapter 3. Installing the Product 3 - 29
TIP Editing the Abbreviation List
To enable the abbreviation list stored in the system, click the Autotext Edit button.
The system will switch to the Auto Text Edit screen.
To save the changes and finish editing, click the Close button.
– Modify Word
1. Use the trackball and the Set button to select a word to modify from the list.
An abbreviation for the selected word and its full version are displayed under
Abbreviation and Full Word at the bottom of the screen.
2. Modify words in the Abbreviation and Full Word fields. The abbreviation list is
updated in real time.
– Add Word
1. Click the New button.
2. Enter words to add in the Abbreviation and Full Word fields at the bottom of
the screen. The entered words are added to the abbreviation list.
– Delete Word
1. Use the trackball and the Set button to select a word to delete from the list.
An abbreviation for the selected word and its full version are displayed under
Abbreviation and Full Word at the bottom of the screen.
2. Click the Delete button. The following warning message will appear:
3. To delete the selected word, click OK. The selected word will be deleted from
the abbreviation list. Click Cancel to cancel.
– Specify Word Input Delays
Specify the time taken by the system to automatically convert an abbreviation
into a full word and display it on the screen. In the Auto Text Delay Time field at
the bottom of the screen, enter the input delay time as a value from 0.1 - 5
seconds.
To Next Page