Chapter 3. Installing the Product 3 - 15
▌ Screen Keyboard
Auto Pop-up on Patient Information
Set this to On or Off by using the trackball. If it is set to on, the on-screen keyboard
appears automatically when entering patient information.
▌ Control
Trackball Speed on Scan Mode
Specify the trackball speed as Slow, Normal, or Fast.
Trackball Speed on Measurement
Specify the trackball speed as Slow, Normal, or Fast. Slower speeds allow more precise
measurements.
Zoom In
Selects the direction in which to rotate Zoom dial to zoom in on an image.
– Clockwise: Rotating the dial-button clockwise zooms in on an image.
– Counterclockwise: Rotating the dial-button counter-clockwise zooms in on an image.
Set/Exit Key
Set the functions of the buttons to the left and right of the trackball on the control panel.
– L: Set/R: Exit: The left button is set to Set and the right button is set to Exit.
– L: Exit/R: Set: The left button is set to Exit and the right button is set to Set.
– L: Set/R: Set: Both the left and the right buttons are assigned the Set function. When
this button is selected, a warning message appears, stating that Exit function needs to
be established.
Indicator Location Selection
You can set the position to use the Indicator. Select touch screen or control panel.
▌ Sound
Generate a buzzer sound when a button or dial-button is used.
To Next Page
Loading...