Chapter 3. Installing the Product 3 - 19
– Right or Bottom: Color Doppler Mode is located in the right or lower part of the screen.
– Left-Right Dual Live Mode Only: The Top-Bottom Dual button disappears when you
check this checkbox.
Dual Mode
Show ‘Change Window’ button: Select whether to activate the Change window in Dual
Mode.
Option
You can specify more than one item. Select an item with the trackball or the Set button to
check or uncheck an item.
– Active HPRF on PW mode: Select whether to activate HPRF (High Pulse Repetition
Frequency), which is supported in PW Spectral Doppler Mode. Check the checkbox to
use the HPRF function.
– Color Map Auto Invert (on linear): Check this checkbox to automatically highlight the
Color Map. This is only applied when you change Steer in 2D/C/D Mode, C Mode, or
DPDI Mode in PD Mode.
– M/PW Loop Side By Side: Add Loop Side By Side display in M Mode or Power
Spectral Doppler Mode.
– Width Scale: Automatically fit the image size to the screen size, when the depth of a
2D image is adjusted. This function can be used only with a Linear Probe.
– Active PW mode through M-Line: In 2D Mode, pressing the Set button when M Line is
“On” will take you directly to PW Mode.
– M-Line with sample volume gate: When M Line is in use, a sample volume Gate is
shown together with the M Line.
– Hide mode info.of saved cine: Hide mode info of the saved cine and increase the
image size.
▌ Default Text
Show Operator Name on Scan Image
Type: Select Diag. Physician, Ref. Physician, or Sonographer. Turn this option Off to hide
it from the screen.
▌ Auto Calc.
Auto Calc. is a Spectral Doppler Mode feature that automatically performs specific
To Next Page
Loading...