SAMWONTECH
1st Edition of TEMP880S IM : Sep. 21. 2005 Page 1 / 101
※This is a manual for a Thermal Shock Test Controller(TEMP880S).
1. Installation Instruction
1.1 Instructions(Cautions) for Safety
Thank you for purchasing our Thermal Shock Test Controller(TEMP880S).
This instruction manual explains how to install and use the product.
음Safety Symbol Mark
(A) Represents “Handle with care” or “Caution.” It may cause death, serious injuries, or
damages on the machine if it is violated.
(1) Product : It represents the matters for the protection of the user and product.
(2) User’s manual: In order to prevent the user from receiving electric shocks, it
describes the matters that demand special attention.
(B) Represents a “Grounding Terminal”.
Please make sure the product is earthed when installing and using.
(C) Represents “Additional explanation”
Describes supplementary explanation.
(D) Represents “Reference”.
☞
Describes referential explanation and reference page.
음Cautions for the manual음
(A) Make sure the final users keep this manual, and place it at which it can be easily found.
(B) Use the product after having through full knowledge of the manual.
(C) This manual describes function of the product specifically, and does not warrant matters that
(C) are not included in the manual.
(D) The user should not edit or photo copy any part of the manual without notice.
(E) Some matters on the manual may be changed without notice.
(F) If any errors suchb as poor parts, misexplanation, or omission are found on the manual, please
(C) contact where it was purchased or the business department.
To Next Page
Loading...