SAMWONTECH
1st Edition of TEMP880S IM : Sep. 21. 2005 Page 73 / 101
3. PARAMETER SETTING TABLE
▶ Table that organizes setting range and initial value of inner parameters for each screen.
2.7 Operation Setting
Symbol Parameter Setting Range Unit Initial Value
POWER MODE POWER MODE STOP, COLD, HOT ABS STOP
FUZZY SELECT FUZZY SELECT OFF, ON ABS OFF
KEY LOCK KEY LOCK OFF, ON ABS OFF
DEFR. CYCLE DEFROST CYCLE 0(OFF), 1~9999 ABS 0(OFF)
DEFR. SP DEFROST SP -10.0~100.0 EU 0.0
DEFR. TIME DEFROST TIME 1~99 ABS 1
DEFR. M.OPER
DEFROST MANUAL
OPERATION
OFF, ON ABS OFF
2.8 Reserve Setting
Symbol Parameter Setting Range Unit Initial Value
Y YEAR 0~99 ABS 0, 1
M MONTH 1~12 ABS 0, 1
D DAY 1~31 ABS 0, 1
H HOUR 0~23 ABS 0, 1
M MINUTE 0~59 ABS 0, 0
RESERVE MODE RESERVE MODE OFF, ON ABS OFF
2.9 Graph and Graph Record Setting
Symbol Parameter Setting Range Unit Initial Value
PTNO PATTERN NUMBER 0~120 ABS 0
RECORD MODE RECORD MODE STOP, RUN ABS STOP
SAMPLING TIME SAMPLING TIME 1~59 ABS 5
TIME UNIT TIME UNIT SEC, MIN ABS SEC
BACKUP ITEM SELECT BACKUP ITEM PTN, PARA, ALL ABS PTN
DIRECTION SELECT DIRECTION DNLOAD, UPLOAD ABS DNLOAD
To Next Page
Loading...
Need help?
General
