SAMWONTECH
1st Edition of TEMP880S IM : Sep. 21. 2005 Page 38 / 101
Diagram 2-29. Graph Record Set Screen
No. Instruction Contents Additional Explanation
○
1
Motion Mode Activate or stop the graph record
▶ “RUN” only during program operation
▶ and fix operation.
▶ Switched to “STOP” when program
▶ operation and fix operation stops.
○
2
Time Unit Selects time saving unit.
○
3
Record Cycle Sets recording cycle.
○
4
Transmission
Object
Selects transmission object.
▶ PTN : Selects parameter for pattern
▶ PTN : set, repetition set, test name
▶ PTN : input.
▶ PARA : Selects all parameters except
▶ PARA : the ones selected at PTN and
▶ PARA : communication related
▶ PARA : parameters.
▶ ALL : Selects all parameters except
▶ ALL : communication related ones.
○
5
Transmission
Direction
Selects upload/download.
▶ Upload : Transmits selected object
▶ Upload : from UDC100 to TEMP880S.
▶ Download : Transmits selected object
▶ Download : from TEMP880S to
▶ Download : UDC100.
○
6
Transmission Transmits data
▶ It is impossible to switch screen
▶ during transmission.
○
7
Memory Use Displays currently using memory.
☞ To use UDC100, format the memory stick to FAT16.
○
4
○
3
○
1
○
6
○
2
○
5
○
7
To Next Page
