Sanyo Denki PY2A030 - PY Setup Software

PY Manual Copyright © 2006 SANYO DENKI AMERICA, Inc.
65
The remote operator has seven (7) modes, Parameter Set 0, 1, 2, & 8 Parameter Select,
Monitor, Alarm Trace, and Test. The diagram below shows how to navigate through
these modes. The up and down arrows are used to scroll through the elements within a
mode.
Remote Operator
Modes Navigation
MODE
ON
SANYO DENKI
REMOTE OPERATOR
*Para. Set
0
SANYO DENKI
REMOTE OPERATOR
SANYO DENKI
REMOTE OPERATOR
SANYO DENKI
REMOTE OPERATOR
7
MODE
ON
MODE
ON
MODE
ON
SANYO DENKI
REMOTE OPERATOR
SANYO DENKI
REMOTE OPERATOR
Remote Operator
<Ver. #. ## >
SANYO DENKI
REMOTE OPERATOR
*###-##-##-#-## *
Push /Mode/Key
SANYO DENKI
REMOTE OPERATOR
* Mode Select *
Push[0]to[4]Key
MODE
ON
0
MODE
ON
3
F
2
E
1
C
13
Parameters
18
Parameters
8 Items
5 Items
A
uto Tune / Jog
Before
Next
Before
Next
Before
Next
Before
Next
Before
Next
Kp
: 120rad/S
*Para. Set 2
Func1 : 00000000
*Para. Set 1
PMUL : 15
*P U
p
=1
,
Down=0
Kvp 725
*Test 0
Jog Set 10min
-1
A
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com