Sanyo PLC-WL2500 - Top Panel

10
Part Names and Functions
Top Panel
①
②
③
③ LAMP REPLACE indicator
Turnyellowwhenthelifeoftheprojectionlamp
drawstoanend.(pp.63,70)
② WARNING indicator
Emitaredlightwhentheprojectordetects
abnormalcondition.Thisalsoblinksredwhen
theinternaltemperatureoftheprojector
exceedstheoperatingrange.(pp.60,70)
① POWER indicator
Itturnsredwhentheprojectorisinthestand-by
mode.
Itremainsgreenwhiletheprojectorisunder
operation.(pp.18,70)
Indicators
Topcontrols
①
②
③
④
⑥
⑤
① ON/STAND-BY button
Turntheprojectoronoroff(pp.18-20).
④ MENU button
OpenorclosetheOn-ScreenMenu(p.21).
② Point ▲▼◄► ( VOLUME – / + ) buttons
 –SelectanitemoradjustthevalueintheOn-
ScreenMenu(p.21).
 –PantheimageinDigitalzoom+mode(p.36).
 –Adjustthevolumelevel(withPoint◄►buttons)
(p.24).
③ SELECT button
 –Executetheselecteditem(p.21).
 –Expand or compress the image in the Digital
zoommode(p.36).
⑤ KEYSTONE button
Correctthekeystonedistortion.(pp.23,46)
⑥ INPUT button
Selectaninputsource(pp.27-28,37-38)