Sanyo PLC-WL2500 - Turning off the Projector

20
TOMAINTAINTHELIFEOFTHELAMP,ONCE
YOUTURNTHEPROJECTORON,WAITAT
LEASTFIVEMINUTESBEFORETURNINGIT
OFF.
Power off?disappearsafter4seconds.
Turning Off the Projector
PresstheON/STAND-BYbuttonontheremotecontrol
oronthetopcontrol,andPower off? appearsonthe
screen.
Press the ON/STAND-BY button again to turn off the
projector.ThePOWERindicatorstartstoblinkred,and
thecoolingfanskeeprunning.(Youcanselectthelevel
offans’quietnessandspeed.See“Fan” onpage57.)
Atthistime,youcanunplugtheACpowercordevenif
thefansarestillrunning.
1
2
3
Whentheprojectorhascooleddownenough,the
POWERindicatorstopsblinkingandyoucanturnon
theprojector.
Note:
 •WhentheDirectonfunctionissettoOn,theprojector
willbeturnedonautomaticallybyconnectingtheAC
powercordtoanACoutlet.(p.52)
 •Therunningspeedofcoolingfansischangedaccording
tothetemperatureinsidetheprojector.
 •Donotputtheprojectorinacasebeforetheprojectoris
cooledenough.
 •IftheWARNINGindicatorblinksorlightsred,see
“WARNINGindicator”onpage60.
 •WhilethePOWERindicatorisblinking,thelampis
beingcooleddownandtheprojectorcannotbeturned
on.WaituntilthePOWERindicatorstopsblinkingtoturn
ontheprojectoragain.
•ThefanrotationwillterminatedirectlyiftheACpower
cordisunpluggedimmediatelyaftertheprojectoris
turnedoff.
•TheprojectorcanbeturnedonafterthePOWER
indicatorturnsred.Thewaitingtimetorestartwillbe
shortenedwhenthenormalpower-offprocessingforfan
coolingiscompleted,comparedwiththetimetheAC
powercordisimmediatelyunpluggedafterthepower-
off.
DONOTOPERATETHEPROJECTOR
CONTINUOUSLYWITHOUTREST.
CONTINUOUSUSEMAYRESULTIN
SHORTENINGTHELAMPLIFE.TURNOFFTHE
PROJECTORANDLETSTANDFORABOUTAN
HOURINEVERY24HOURS.
Basic Operation
Youcandisconnectthepowercordfromthe
walloutletorturnoffthebreakerevenduring
projectionwithoutpressingtheon/stand-by
button.
Note:
•WhenusingtheDirectOFFfunction,you
cannotrestarttheprojectorimmediatelyafter
thepowerisdisconnected.Iftheexternal
powersupplyissuddenlycutoff,thefan
stopsimmediately.Thelampremainshigh
temperatureandneedstobecooled.
Direct OFF Function