Sanyo PLC-WL2500 - Menu Bar

22
Menu Bar
Fordetailedfunctionsofeachmenu,see“MenuTree”onpages68-69.
①
②
③
④
⑤
⑥
⑦
⑧
MainMenu
Sub-Menu
⑨
⑩
③ Image select
Forcomputersource,usedtoselectanimagemodefromamongDynamic,Standard,Real,Blackboard(Green),
ColorboardandImage 1-4.(p.33)
ForvideoorHDMIsource,usedtoselectanimagemodeamongDynamic,Standard,Cinema,Blackboard(Green),
ColorboardandImage 1-4.(p.40)
④
Image adjust
 Forcomputersource,usedtoadjustcomputerimage[Contrast,Brightness,Color temp.,White balance (Red/Green/
Blue), SharpnessandGamma].(pp.34-35)
ForvideoorHDMIsource,usedtoadjustpictureimage[Contrast,Brightness,Color,Tint,Color temp.,White
balance (Red/Green/Blue),Sharpness,Gamma,Noise reduction andProgressive].(pp.41-42)
② PC adjust
SelectAuto PC adj.,Fine sync,Total dots,Horizontal,Vertical,Current mode,Clamp,Display area HandDisplay
area VtoadjusttheparameterstomatchwiththePCinputsignalformat.(pp.34-35)
⑤
Screen
Forcomputersource,usedtoadjustsizeoftheimage[Normal,True,Full,CustomandDigital zoom +/–].(pp.35-36)
ForvideoorHDMIsource,usedtosetsizeofimage[Normal,Full,Zoom,Wide, Natural wideandCustom].(p.43)
① Input
 UsedtoselectaninputsourcefromComputer 1,Computer 2,HDMI,VideoorS-video. (pp.27-28,37-38)
⑥ Sound
Usedtoadjustthevolumeormutethesound.(p.24)
⑧ Information
Displaytheinputsourceinformation:Input,H-sync freq.,V-sync freq.,Screen,Language,Lamp status,Lamp
counter,Power management,Key lock,PIN code lockandRemote control. (p.59)
⑩ Guide
Thekeyoperationisdisplayed.
⑦
Setting
Usedtosettheprojector’soperatingconfigurations.(pp.44-58)
⑨ Network
Seeowner’smanualof“NetworkSet-upandOperation”.
Basic Operation